Camcon Futuristic Bowgun
Camcon Futuristic Bowgun
Published 2017-02-21T12:01:22+00:00
This is my entry for the Monster Hunter challenge,
I tried to recreate the old/new combination that existed in the bowgun and give it a more futuristic look.
I focused on the ease of print and assembly, with plenty of room for customisation.
The different part keep the print times fairly low, while allowing for a pretty big scale model on smaller printers.
Would love to be able to make a massive version of this on a N2+ (I originally wanted to have this 2 times bigger, but had to reduce the scale due to print times and my current printer size limitation)
I've uploaded 3 files : One with all the parts, that should be helpful for the assembly.
The second file is only the pins and spacers.
The last one contains all the different parts, minus the pins and spacers, and will let you arrange the parts as you prefer.
All the parts have an obvious flat surface to print from, and don't require any support. The trigger cover can use some, but printing it a little slower allows you to print without supports.
The pins for the assembly should provide a tight enough fit that you won't need any tool or glue for the assembly, but you can also use a dot of glue on the pins extremity for a more durable assembly.
Date published | 21/02/2017 |
Tecnología | FDM |
Complejidad | Medio |