Castle Run: A Mini Marble Adventure
$7.99 Castle Run: A Mini Marble Adventure
Published 2019-08-23T15:24:14+00:00
Hear ye hear ye! You have been invited to explore the grounds of the great King Marble's castle. Come and roll around its halls and chambers, battlements and buttresses by means of a magical control panel. Spin towers and move staircases by the push of a button!
This print makes a perfect desk toy or a great introduction of basic mechanical principles for a future engineer. No supports needed! Download and print today!
Designed for 3/8" steel ball bearings. One rubber band required.
See photo gallery for step by step building guide.
No supports needed.
Because the pieces are so small I'd recommend printing with a brim. You can print more than one piece at once if you'd like.
All files should already be oriented properly on the build plate when brought into the slicer. Leave a comment if you have any questions.
Make sure to print the Button and See-saw TWICE.
Date published | 23/08/2019 |
Precio | $7.99 |
Sin apoyo | YES |
My bearings are a little small, but it worked well. The only issue I see is the turn-control knob is a little close to the path, so it bumps easily. Printed Solid Jessie (green), Amazon Basics (copper), Polyalchemy Elixir (copper), scraps of various filaments for the leavers internally