Chinese New Year Dragon Incense Holder
21,719
visitas
3,116
descargas
21
colecciones
3 comentarios
Cargando comentarios...
Chinese New Year Dragon Incense Holder
3D
Published 2015-02-17T12:30:56+00:00
404
3
Add to Collection
Descripción
I really wanted to celebrate the Chinese New year but create something that could be used all year round. As I love incense I had the idea of creating a spiralling dragon that could hold incense through its spiralling tail.
This comes in two pieces and should print pretty much support free as I have created the supports myself.
Let me know what you think!
Detalles de impresión
This piecewas printed at 0.2mm layer height and 8% infill. The dragon took 780 minutes and used 115 grams of material The base was 644 minutes and 141 grams.
Información técnica
Date published | 17/02/2015 |
¿Cuándo tiempo lleva? | 1400 - 1500 minutos |
Cantidad de filamento | 256g |
Dimensiones | 253 x 83 x 102mm |
Complejidad | Medio |
Más información
Archivos
the supported file is flat on the build plate... so I did it the old way... (used the unsupported file and let the slicer create the support) as you can see... broke the front left paw.. will try again :)