Christmas tree spinning keychain and ornament (Articulated)
Christmas tree spinning keychain and ornament (Articulated)
Published 2020-12-14T13:20:16+00:00
Here is a model of a Christmas tree that prints without supports. Just load file, slice and print. The tree has a separate trunk that can be screwed into the base of the tree for a more 'complete' look. The tree has 5 segments that can revolve completely independent of each other and the tolerances are somewhat generous such that machines not properly tuned can also print this model well. Since the segments can spin the tree can also be used as a 100% 3D printed fidget spinner :). The star at the top has holes to use as a hanging ornament or even a keychain.
Download this model and try it out, do ask in comments if there is any problem occurring with this model and I will surely try to solve it for you guys.
Thanks and Merry Christmas!!
Use of brims is recommended, the model is already oriented in the optimized orientation for printing. After the print completes, remove the tree from the build plate, remove the brim and gently move/rotate each segment to free them up and allow easy spinning. For the trunk you might have to use an appropriately sized screw or tap (I guess an M7 or M8) in the hole at the base of the tree to make the threads fit.
Date published | 14/12/2020 |
Sin apoyo | YES |