Chyuuties [Fanart]: Sailor Moon
![Chyuuties [Fanart]: Sailor Moon image](https://cdn.myminifactory.com/assets/object-assets/5e2de27a27b7d/images/70X70-001sailormoon001.jpg)
![Chyuuties [Fanart]: Sailor Moon image](https://cdn.myminifactory.com/assets/object-assets/5e2de27a27b7d/images/70X70-001sailormoon003.jpg)
![Chyuuties [Fanart]: Sailor Moon image](https://cdn.myminifactory.com/assets/object-assets/5e2de27a27b7d/images/70X70-001sailormoon002.jpg)
11,535
visitas
1,514
descargas
16
colecciones
![Picture of print of Chyuuties [Fanart]: Sailor Moon](https://cdn.myminifactory.com/assets/object-assets/5e2de27a27b7d/images/230X230-img-8881.jpg)
![Picture of print of Chyuuties [Fanart]: Sailor Moon](https://cdn.myminifactory.com/assets/object-assets/5e2de27a27b7d/images/230X230-img-3842-6474143bbe3fa.jpg)
![Picture of print of Chyuuties [Fanart]: Sailor Moon](https://cdn.myminifactory.com/assets/object-assets/5e2de27a27b7d/images/230X230-img-3841-6474143c2bd9a.jpg)
0 comentarios
Cargando comentarios... 
Chyuuties [Fanart]: Sailor Moon
3D
Published 2020-02-03T19:40:13+00:00
149
0
Add to Collection
Descripción
Introducing Chyuuties- my own cute take on a singel style collectable (like Funko Pops, QPockets or even the Dudes).
This one is of Sailor Moon.
Licencia
Detalles de impresión
Photograph shows 3D object printed in parts at 0.2mm on a CR-20 (FDM). Printed to roughly 3 inches.
Información técnica
| Date published | 03/02/2020 |
Más información
Archivos
![Picture of print of Chyuuties [Fanart]: Sailor Moon Esta impresión fue cargada por Ryan Wicke](https://cdn.myminifactory.com/assets/object-assets/5e2de27a27b7d/images/img-8881.jpg)
![Picture of print of Chyuuties [Fanart]: Sailor Moon Esta impresión fue cargada por Christopher](https://cdn.myminifactory.com/assets/object-assets/5e2de27a27b7d/images/img-3842-6474143bbe3fa.jpg)
![Picture of print of Chyuuties [Fanart]: Sailor Moon Esta impresión fue cargada por Christopher](https://cdn.myminifactory.com/assets/object-assets/5e2de27a27b7d/images/img-3841-6474143c2bd9a.jpg)
First big print. Made the pieces hollow and used extra resin to glue the pieces together. They do not align perfectly, and the pegs on the head and hair do not fit in the holes. I had to trim and sand down the pegs to make fit.