CNC Work Holder for 2"x1/8" Bar
CNC Work Holder for 2"x1/8" Bar
Published 2021-03-08T10:23:51+00:00
Due to the modifications I have made to my 3020 CNC I now have to raise my work up off the bed a significant bit. This jig makes it easy for me to quickly, and repeatably position the bar stock for me to machine parts.
See it being used in this video: Coming Soon!
Products used:
Canadian Maker 3d850 PLA Filament:
General Filament:
https://filaments.ca/?rfsn=4740568.a03b49
Note: Affiliate links above - I earn a commission from qualifying purchases at no additional charge to you just by using the links listed which helps support the channel.
To find more of my work, please check out my website: http://wrightbuilt.ca/
To download any of my own 3D designs, check out my design library: https://www.myminifactory.com/users/WrightBuilt.ca
Support me by Subscribing/Liking my YouTube channel, or by tipping me via MyMiniFactory (PayPal) here: https://www.myminifactory.com/users/WrightBuilt.ca
You can find my disclaimer here: http://wrightbuilt.ca/disclaimer-page/
Printed on a high temperature PLA profile. Took approx 8 hours at 0.28mm layer height and 10% infill. Orient with the large flat face down for both the base and cross bar. Printed on an Original Prusa Mk2.5s with MMU2.0s in Single Material mode.
Date published | 08/03/2021 |
Sin apoyo | YES |