Corner shelfie
Corner shelfie
3D
Published 2021-12-06T12:32:03+00:00
A simple shelf that you can fix using good quality double-sided tape. Make use of that empty space you have!
The shelf is made of two parts so you can swap between different colors, or remove the shelf level for cleaning. You can use them in any square corner measuring at least 130 mm on each side.
The ones in the pictures were printed without top and bottom layers, using a 15 - 20% honeycomb infill.
We probably will add different shapes and sizes! :)
Follow us on Instagram!
About selling our designs
Please be aware that our designs are available for free for non-commercial purposes only.
If you'd like to sell prints of one of our designs, we would be happy to discuss that with you! Please send us a message if you are interested at twothingies@gmail.com
Disclaimer
Due to the different properties of 3D printing filaments and the tolerances of different machines, you might need to scale up or down some of the print files, in case they don't fit when you print them.
Layer height: 0.2 mm
Line width: 0.42 mm
Supports: Not needed!
Infill: play with different patterns and percentages to get the best results! We suggest a low infill speed of 40 mm/s or lower for best results
| Date published | 06/12/2021 |
| Cantidad de filamento | 20 grams |
| Dimensiones | 130 mm x 130 mm x 50 mm |
| Sin apoyo | YES |