Coronavirus, optimised one piece (COVID-19)
7,929
visitas
1,547
descargas
3
colecciones
0 comentarios
Cargando comentarios... 
Coronavirus, optimised one piece (COVID-19)
3D
Published 2020-03-10T06:05:24+00:00
112
0
Add to Collection
Descripción
HI-RES VERSION and ONE PIECE VERSION
Optimized version, improved surface and terminal detail (HIRES), rotated and suitable to be printed in a single piece with supports.
Suggested settings for 100% size (7h):
- Line width: 0.4
- Layer height: 0.2
- Speed: 50-60mm/sec
- Fan 100% PLA, 0% ABS
- Infill: 10-15%
- N. Wall: 2-3
- Top/Bottom: 4-5
- Raft: YES or Brim Support: YES
- Combing: OFF
- Support: YES
- Support placement: Everywhere
- Support overhang: 65-70%
- Support density: 30%
- Connect support: NO
- Minimum support area: 5mm^2
SPLIT VERSION
Optimized version, improved surface and terminal detail, rotated and suitable to be printed in two piece with supports and brim.
Suggested settings for 100% size (5h):
- Line width: 0.4
- Layer height: 0.2
- Speed: 50-60mm/sec
- Fan 100% PLA, 0% ABS
- Infill: 10-15%
- N. Wall: 2-3
- Top/Bottom: 4-5
- Combing: OFF
- Brim: YES
- Support: YES
- Support Brim: YES
- Support placement: Everywhere
- Support overhang: 65-70%
- Support density: 30%
- Connect support: NO
- Minimum support area: 5mm^2
Licencia
Información técnica
| Date published | 10/03/2020 |
| ¿Cuándo tiempo lleva? | 5 - 7 minutos |
| Cantidad de filamento | 40 |
| Dimensiones | 8x8x8 |
| Sin apoyo | YES |
Más información
Archivos
Great didactical tool. Thank you. Printed at 100% size, 210°/70°, support and raft, on a BALCO Touch HE180021, with PLA filament BALCO Orange.