Corridors II Walls
$14.99 Corridors II Walls
3D
Published 2020-04-16T10:40:25+00:00
These wide corridors create a beautiful sci-fi aesthetic perfect for diorama scenes or fully visualised play. Doorway variants and crawlspace entrances are included to create more access points.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially available versions of 2nd Dynasty's 2018 Starship II Kickstarter.
Please note that these are STL files only! You will need a 3D printer or print service in order to print the parts. The parts have been designed with FDM printers in mind at 100-200 microns using PLA or ABS plastic, although you will achieve better results with SLA/DLP printers (resin) or higher resolution FDM prints. You may need to rotate objects for optimal printing or add supports, particularly for overhanging areas, such as the top of door frames.
Parts are designed in 28-30mm scale (1" squares), but can be rescaled easily in your 3D printing software package.
This package includes high detail tiles, including:
- Type A door
- SB Wide Doorway Door
- Iris Hatches (half and full)
- S and II S-Wall corridors
- SA S-Wall Doorways, 3 variants
- SB S-Wall Doorway, 1 variant, plus separate frame for support-free printing
- EN and II S-Wall corners
- S S-Wall crawlspace access points (lower and upper) and vent
- S Window section
- A basic print & paint guide
We recommend printing at 100-150 microns (0.15 mm) layer thickness. All models are optimised for printing with as few supports as necessary, and have been oriented for optimal printing. Base tiles have built in supports that require removal after printing to fit the clips.
See the attached print guides for more tips.
| Date published | 16/04/2020 |
| Precio | $14.99 |