Creality Ender 3 Auto Level Mount for M8 Pinda Probe
This object has been checked for printability, but did not pass the test and was deemed not printable. This object is still shareable and people with this link will be able to see and download the object, so please make sure you watch out and progress with care!
×Creality Ender 3 Auto Level Mount for M8 Pinda Probe
3D
Mounting Bracket.
Auto Level Probe Mount.
----------------------------------------
----------------------------------------
Just a very simple mount with a threaded M8x1 through hole to mount M8 Inductive probes or the Prusa PINDA sensor.
I have printed and tested the thread and all seems Ok just need to print at a lower layer height e.g 160 micron or lower. I haven’t tried mounting it yet as i still have to mount my new magnetic heated beds and flexplates.
Probe offset in X is -44mm, in Y i would try to align it exactly with the nozzle.
----------------------------------------
Materials:
Pinda v2 Probe - Aliexpress
2 x M3x6mm Cap Head Bolts
2 x M3 Brass Inserts
That's all folks.
Printed in Sunlu Filament Black PETG purchased from Amazon.
Nozzle : 0.4
Layers : 0.16
Print Temp : 240°C
Bed Temp : 75°C
Print Speed : 50mm/s
Top Layers : 5
Bottom Layers : 4
Perimeters : 3
Infill : 25%
Printed on PEI.
| Status | Rejected |