Creality Ender-4 Upgrade to 12864 Graphic Display
Creality Ender-4 Upgrade to 12864 Graphic Display
3D
Published 2019-04-17T11:20:15+00:00
Issue: A stock Ender-4 display based on text 2004 screen looks like a guest from the last century.
Solution: Upgrade to 12864 Graphic display. 30* display holders are the same as described in the https://www.myminifactory.com/object/3d-print-91418
Simple front panel print with no support.
Both connectors on the flat cables should be flipped 180 degrees for display to work properly. Remove the lock tabs (file them out) from the EXP1 and EXP2 connectors, so you can place them reversed in connectors at the display board (RE pictures).
Changes in the Marlin:
comment an old 2004 Controller (dash symbol is removed):
// #define REPRAP_DISCOUNT_SMART_CONTROLLER
define new 12864 Graphic Controller:
#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
#define REVERSE_ENCODER_DIRECTION
Overall budget: ~$10 USD for the module
BoQ:
- 1 x 12864 Graphic Display Module: http://got.by/3d1exe
- 1 x Display Front Panel: print face down, no support
- 4 x Display Spacers (red at pictures): spacers of several heights are available, depend on the display module assembly
- 2 x Bottom Holder, 1 x Top Corner Holder - refer to my recent post https://www.myminifactory.com/object/3d-print-91418
Enjoy!
If you like my design, please, consider making a small "cup of coffee" donation using PayPal
- PLA, ABS
- Resoluiton 0.2mm
- infill 15% Gyroid or quarter qubic
| Date published | 17/04/2019 |
| Tecnología | FDM |
| Sin apoyo | YES |
Printed on my own build printer I add a Logo image and a reset button