CRYO STORAGE - MicroSD Card Holder
CRYO STORAGE - MicroSD Card Holder
3D
Published 2020-03-26T13:00:15+00:00
One day holding my micro SD card I had a random thought connecting the idea of storage to cryo storage, no idea why but this is what came of it!
Best printed in SLA on something like a photon. The resolution of the tech really makes a huge difference in the ease of printing and quality of threads.
When you insert the lid there are two channels; an open one to accept the lid but once inside when you turn the lid 90 degrees theres another channel that allows the tabs to catch when you pull the lid out which prevents the parts from seperating.
MATERIALS NEEDED:
Anycubic Photon S - https://amzn.to/3du9VZw
Grey Resin DLP - https://amzn.to/2QID8GE
Recomend washing the threads throughly you don't want ANY excess uncured resin to add thickness or it'll probably cause it to bind when threading.
Higher the resolution the better but 50 microns is okay.
NOTE** Currently demand for alcohol 70% and up is high and in short supply, I don't recommend this project without high percentage alcohol the resin is difficult to remove with lower than 70%.
| Date published | 26/03/2020 |
| ¿Cuándo tiempo lleva? | 180 - 181 minutos |