Cryptwalker Colossus
$14.00 Cryptwalker Colossus
3D
Published 2021-02-05T15:04:34+00:00
SPAWNS OF THE GREAT ROT
Chapter: Geists
Subject: Crypwalker Colossus
Description
This massive, abhorrent creation brings absolute destruction wherever it's headed.
This wandering graveyard was turned into the perfect siege weapon. It crushes everything in its path,
then collects the pieces and throws them into its massive cauldron which then channels the smoke and energy into its dragonbone cannon.
But at least you can hear it from miles away with all the screams from the souls that are stuck within its ever-burning flame...
Details:
Cryptwalker Colossus stands on a 130mm customized base, standing about 240mm tall!
The Crypwalker Colossus comes in many parts, and 3D Elements has included some Lychee (.lys) files that have a hollowed version of the parts that are very big.
The whole model has been sliced and presupported with small printers in mind.
3D Elements Printing guide
- Models validated and supported for 50um LH (0,05mm)
- If you cannot print them on mono printers I suggest to increase cure time (even with fast resins even to 2.6s)
- I suggest 5 burn in layers (you can also add 2 transition layers)
- Raft is thin to prevent raft separation and resin wasting + FEP degradating
- If you struggle with removing supports please use warm water to make them soft then remove it
- Cure your model after removing supports and be gentle since some of the parts are thin.
General info of codes
- Presupported = heavy presupports
- L-Presupported = Lighter version of supports
- LL-Presupported = they are most lightly supported, working good with well calibrated printers, also leaving minimum ammount of scars on the model.
Happy Printing,
- Daniel Krasuski
| Date published | 05/02/2021 |
| Precio | $14.00 |
| Sin apoyo | YES |