Customizable Horseshoes
Customizable Horseshoes
3D
Published 2018-12-06T19:00:18+00:00
This file is meant to aid those in rural or developing environments. While printable materials may not be suitable for long-term use as hoof protection, these printable horseshoes are meant to offer short term relief, and at least some protection from the environment. Additionally, the file is easily modifiable, and can be altered to fit horses or other hooved animals of any size. Directions for customization are below.
Customization Directions:
-Open the .FCstd file in FreeCAD
-Navigate down the trees to find the "Base Horseshoe Sketch" sketch
-Double click this to edit the sketch. It should look like this:
-From here, many aspects can be changed, including the length, width, and material width of the shoe. Any changes made here should instantly affect the model itself, as well as the slots for the nails.
-Additionally, the slots themselves can be edited by navigating to the "Slots Sketch" sketch, and editing it.
-The height, slot depth, and many more features can be adjusted by navigating around the part, and editing the individual features. These values are often displayed in the box below the navigation panel. Here, you can see that the depth of the slots is 2.5mm :
**PLEASE NOTE: THESE HORSESHOES HAVE YET TO BE TESTED IN THE REAL WORLD. PLEASE USE COMMON SENSE, AND CAUTION.**
It is reccomended that this file be printed with 100% infill for maximum stability. Otherwise, the file is relatively simple, and requires no support material. When it its necessary to secure the shoes to an animal, holes can be melted into the shallower sections of the shoe with a heated nail before attaching. Holes were not included in the desing in order to accomodate more potential applications.
| Date published | 06/12/2018 |
| ¿Cuándo tiempo lleva? | 20 - 180 minutos |
| Dimensiones | Variable |
| Sin apoyo | YES |
