Dark Zero Suit Samus
Dark Zero Suit Samus
3D
Published 2020-07-09T13:40:58+00:00
This is a concept art creation copied from 2D-3D, with some interpolation.
Credit to LoganCure for making the original concept found here:
https://www.artstation.com/artwork/36lWY
https://www.artstation.com/logancure
My files should be 100% free. If you see another copy of this uploaded elsewhere, please contact MyMiniFactory's Staff.
If you can spare it, tips will go a long way.
I used mostly default settings on Ender 3. Temperature was changed based on filament, initially I started with brims but became lazy and went for rafts (they almost always guarantee adhesion to the build plate). It takes approximately 36 hours to print the every part. Split, 10 hours for body, head 4 hours, hands 1-2hr, legs 2-3 hours, 12-14 hours for base.
Use supports!!!
I used Superglue (cyanoacrylate) to reinforce certain aspects (hair and fingers mostly) and Superglue + baking soda combination to adhere the parts together. Wood filler is a good choice to smooth out the gaps created with this method.
For FDM, my post processing process is the following:
Sandable Primer, dry, sand, more primer, sand etc. (wood filler works better IMO but requires much more cleanup)
Thin paint properly to avoid strokes
| Date published | 09/07/2020 |
| Dimensiones | 6 x 6 x 10.5 |
theres a little gap on the side of one of the skulls that hangs over. I think cura is complaining about it and might tip over if printing the full one. I might be wrong though.