Dell Latitude E-Docking Spacer
3,319
visitas
73
descargas
0 comentarios
Cargando comentarios... 
Dell Latitude E-Docking Spacer
3D
Published 2018-05-03T12:51:24+00:00
5
0
Add to Collection
Descripción
This is a replacement for the following:
http://www.dell.com/en-us/shop/dell-latitude-e-docking-spacer/apd/452-bbtr/pc-accessories
It is used for smaller laptops (eg. Latitude 5000 series) that dont take up all the space on the dock.
Detalles de impresión
Printed at 0.2mm. If you print it upside down, you only need a some supports for the tab that comes out at the front. Otherwise, you can print it the right way up with supports inside, then just leave the supports in when its done (which will make it a bit stronger too). You'll just need to remove the supports from the two small areas with the semi-circle shapes.
Información técnica
| Date published | 03/05/2018 |
| Tecnología | FDM |
| Complejidad | Fácil |
Más información
Archivos
