Designer Toothbrushholder ( with Voronoi pattern)


Designer Toothbrushholder ( with Voronoi pattern)
Published 2018-10-12T02:42:11+00:00
Designer toothbrusholder with voronoi diagram.
Credit goes out to LaunchLab who design this model in the 1st place:
https://www.thingiverse.com/thing:553607
I remixed this wonderfull design by LaunchLab with the intention to give the model a different twist.
I have printed this model with a 0.4mm nozzle and 0.15 mm layerheight. Infillrate was 18 %.
As support i used a brim. Print with the toothbrush-holes facing you.
Design process
To make a voronoi pattern on a model like this i discovered you had to make it a solid first in Meshmixer (first i had no idea). The rest was a piece of cake! .. .if you follow a tutorial about this meshmixer tool (make pattern), you will learn the skill in under 15 minutes.
I have links to meshmixer tutorials in my other (voronoi) designs. Just check them out!
:)
Date published | 12/10/2018 |
¿Cuándo tiempo lleva? | 700 - 701 minutos |
Cantidad de filamento | ~ 45 gram |
Dimensiones | 128*53*52 mm |
Sin apoyo | YES |
Support material is definitely off. Print this model positioned as shown in the picture below. With the holes facing you. I did use a brim for better adhesion.