Dial Indicator and thickness gauge stand
Dial Indicator and thickness gauge stand
3D
Published 2018-11-18T01:42:25+00:00
This is a very simple dial indicator stand for the use of mounting an analoge or digital dial indicator to either measure your Z Axis endstop, or a thickness gauge (flip upside down) and even used to measure the amount of flex in a piece of material or simply find the thickness of a piece of material.
A sample holder is coming where you print a sample, attach it to the holder and used a fixed amount of weight to see the amount of flex a piece of printed filament has.
NOTES: This slot uses an M6 Socket Cap screw sizing. Use supler glue or epoxy to make the stand and holder ridgid and accurate.
Print parts laying down with the holes up. No need to print the holder part vertical it can lay down as well.
NOTES: This slot uses an M6 Socket Cap screw sizing. Use supler glue or epoxy to make the stand and holder ridgid and accurate.
| Date published | 18/11/2018 |
| ¿Cuándo tiempo lleva? | 60 - minutos |
| Sin apoyo | YES |