Diamond Planter (Vase Mode)
2,567
visitas
293
descargas
1
colección
0 comentarios
Cargando comentarios...
Diamond Planter (Vase Mode)
3D
Published 2020-05-14T10:23:44+00:00
29
0
Add to Collection
Descripción
A simple planter that I designed for my daughter. it's designed to be printed in "double wide" vase mode. But will, print fine in standard vase mode.
Double Wide vase mode is simply setting your perimeters to .8 for a .4 nozzle or 1mm for a .5 or .6 nozzle. and bumping up your extruder temp by 5 Degrees or so. Most printers will print at 25-30mms in this set up. Remember, by default in Cura your default wall/perimeter speed is 1/2 of your printing speed. So 60mm second = 30mms wall speed. and wall speed is what we are wanting at 20-30mms.
Información técnica
Date published | 14/05/2020 |
Sin apoyo | YES |
Más información
Archivos
Beautiful model Scaled to 50mm height 0.3mm layer height 0.5mm later width 90mm/s wall speed (serious)