Diy Drill Dust Collector Vacuum Attachment 32mm VAX
11,828
visitas
784
descargas
9
colecciones
0 comentarios
Cargando comentarios... 
Diy Drill Dust Collector Vacuum Attachment 32mm VAX
3D
Published 2017-03-27T18:38:40+00:00
194
0
Add to Collection
Descripción
DIY Drill Dust Collector Vacuum Attachment No More Mess When Drilling!
The Vacuum from the vacuum cleaner will cause this attachment to stick to the wall leaving your hands free to drill a dust free hole...
Supports drill bits up-to 25mm diameter...
Please note: if your drilling through into a empty void or straight through a large drill bit may cause the attachment to lose "vacuum" and fall so please bear that in mind...
Used and tested with a VAX 6131
Thanks SpannerHands : -)
Detalles de impresión
Requires supports
Example printed on a da Vinci 1.0 3D Printer
Quility: Good
Raft: No
Supports: YES
3D Density: Low
Shells: Normal
Layer Height: 0.3
Speed: Standard
Información técnica
| Date published | 27/03/2017 |
| Tecnología | FDM |
Más información
Archivos
Infil 20 Speed normaal