DIYnder V1 - stop motion linear winder set
$20.00 DIYnder V1 - stop motion linear winder set
3D
Published 2020-03-29T20:58:48+00:00
***** DIYNDER MARK 2 IS NOW AVAILABLE! CLICK HERE ******
After many many prototypes, i'm happy to share with the community the Friendly Beans DIYinder: a 3D printed stop motion linear winder you can build yourself.
Linear winders are very useful little tools. They help the animator to have very precise and controlled movements on one single axis at a time. This kit comprises of 2 winder boxes with variable length racks, adjustable friction brakes and a locking knob to hold the rack in a fixed position. It also includes a base that can be either mounted on a support with screws, or fixed in position with weights (the base is designed to fit through an 1-inch barbell weight plate).
Also, check out the review from the amazing Simon, from Odd Planet Studios here.
Sourced parts:
14 M3x12mm bolts
20 M3 nuts
4 M5x20mm bolt
4 M5 nut
8 MR85ZZ bearings
1 1mm PTFE sheet
2 50cm M6 threaded rod
1 M5x45mm countersunk bolt
Instructions for assembly, By OddPlanetStudios here and here.
Download the assembly manual here.
All parts can be printed on 0,15mm layer settings, with regular PLA. Some parts require a higher infill (check manual). No supports are necessary for any of the parts.
I recommend printing the whole set in green or blue, to make the post-production keying out easier.
Download the assembly manual here.
| Date published | 29/03/2020 |
| Precio | $20.00 |
| Sin apoyo | YES |