AEDOOM02 - Hellscatter
$9.00 AEDOOM02 - Hellscatter
3D
Published 2021-06-01T08:50:23+00:00
This set, Doomtech, was an idea that Nasos and Will had wanted to explore for a while. While neither is the biggest fan of the horror genre, they both felt inexplicably drawn to design hellscape universes. The idea of a realm of torture goes back a very long time and this set features a technoevil approach.
This set was voted on for expansion. Hellscatter is a new series of sculpts from Nasos and Will to better torture your adventures and their nightmares.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 01/06/2021 |
| Precio | $9.00 |
| Sin apoyo | YES |