DSLR Time Lapse Trigger
DSLR Time Lapse Trigger
3D
Published 2018-12-23T10:00:19+00:00
This is a mount a made so you can take time lapse by having the print head move over to the right after every layer and take a photo. You will need to figure out how to wire it. In my case I had a velle Free wave plus that I opened the remote and solder wires to the button to actavate the camera trigger.
THis is the gcode that I used on layer change.
G1 X246 Y205 F3000 ;Move away from the print
G4 S0 ;Wait for move to finish
G4 P900 ;Wait for 900ms
Thank you Vedran Marjanovic Wekster for helping me with the G code.
The switch will need to have a metal arm. You'll need to bend the arm a little so it clears the P.I.N.D.A mount. The zip tie is the same ones that came with your prusa. You should have some left over from your build.
Example Time Lapse https://mobile.twitter.com/chris_frieze/status/1078060626839252992
| Date published | 23/12/2018 |
| Sin apoyo | YES |
