Easy to print Generic Excavator (esc: 1:100)
Easy to print Generic Excavator (esc: 1:100)
3D
Published 2017-04-12T16:28:39+00:00
A Generic Excavator, based on the Cat 330 blueprints. Modeled in Skechtup Make. You will need 3x1mm dia x 7mm Bolts and Nuts (or couple of Nail, thanks @fpilot25), two small pieces of a paper clip, and glue to complete the model. I am planing to make more constructions and mining machines in this scale, your comments will be much appreciated. Greetings
Print Settings
Printer Brand: RepRap
Printer: Modified HIC
Rafts: Yes
Supports: Yes
Nozzle: 0.4mm
Resolution: 0.2 mm
Infill: 12%
Notes: Its a quick and easy print, I have tested in ABS (that is why the raft).
# Print Settings
Printer: Prusa i3 HIC
Rafts: Yes
Supports: Yes
Resolution: 0.2
Infill: 30
Notes:
Raft is use to prevent deformation, but it is not totally necessary.
| Date published | 12/04/2017 |
| ¿Cuándo tiempo lleva? | - 120 minutos |
| Cantidad de filamento | 45 |
| Dimensiones | 90x45x70 |
Built a stump pulling screw end for it also, a new attachment we just put on our CAT... wish I could add it here