Elevation Jigsaw Puzzle
$3.00 Elevation Jigsaw Puzzle
3D
Published 2018-11-15T10:42:11+00:00
The Elevation Jigsaw Puzzle is a 16-piece puzzle with pieces shaped like jigsaw puzzle pieces that are slanted on top with some pieces being short, and some tall, and some in between.
Each individual piece is just under 5mm at their thinnest point, and just under 25mm at its widest. The height of the pieces ranges from about 7mm to a little under 50mm.
The pieces nicely fit into a small frame to keep the puzzle together while you assemble it, as well as after its together. It looks nice as an interesting desk toy too.
Printed at 0.2mm layer height, at 60mm/s, on my CR-10.
Like the other puzzles I have made, When they're pinting I print the bottom few layers in one color, and then switch to another color to make it look more complete and is also utilized to differentiate between top and bottom. Although it's not necessary for this puzzle, since its slanted, so it will only fit into the fame one way, but I still like the look of two colors. Its completely optional when you print it.
the size of the puzzle is just under 60mm x 60mm x 50mm. The frame measures close to the same at 63mm x 63mm x 46mm.
I usually always print with a raft, so the times and material quantities reflect pinting with a raft. It also combines the times and amounts for both the puzzle and the frame, although the frame is significantly
| Date published | 15/11/2018 |
| Precio | $3.00 |
| ¿Cuándo tiempo lleva? | 418 - minutos |
| Cantidad de filamento | 61g total |
| Dimensiones | 60mm x 60mm x 50mm |
| Sin apoyo | YES |