Fallout Alien Blaster
Fallout Alien Blaster
3D
Published 2014-12-08T01:40:10+00:00
This is a Fallout inspired alient blaster with LEDS, fully functioning trigger and sound effects! This blaster is split into pieces and designed to house the electronics. Most of the parts are secured together with screws and adhesives. The barrel of the gun features a red laser diode. An LED ring is embed inside the inner barrel and lights up when the trigger is pulled. The trigger features a spring-back effect and a tactle button fires the LED's and sound effects! The handle part houses an amplifier, micro-controller and sound effects board. There's a mini metal speaker mounted in the back of the body of the blaster. A lithium polymer battery can be recharged using USB. Check out the Adafruit learning system for full instructions, circuit diagram and assembly photos.
Check it out in action on YouTube
http://www.youtube.com/watch?v=LoAk22Rd07k
Full Tutorial:
https://learn.adafruit.com/ray-gun-blaster
Print at 0.2 mm layer height, with 10% infill. This uses 151 g of filament and takes 1201 minutes.
| Date published | 08/12/2014 |
| ¿Cuándo tiempo lleva? | 1150 - 1250 minutos |
| Cantidad de filamento | 151g |
A year+ in the making. Yeah it's been on the bench a while. Cleaned, primed then sprayed an aluminum. Went over that with Silver rub n buff. Then washes of Black and Burnt Sienna. The inner windows have a frosted mylar I sprayed with Rustoleum anodized blue (it's clear spray).