Flail from OMF2097
Flail from OMF2097
3D
Published 2017-03-20T12:06:56+00:00
This one is a blast from the past! Harking from the retro DOS game OMF 2097, we did up a model of the iconic Flail bot with its chains printable and ready to go a'flailing!
Pieces have been sized down to fit most 3d printers and assembly on where the parts go are in the images attached to this model. The chain on Flail needs to be printed in a sequence which allows for you to loop them through each other while still being printed.
Instructions are attached for further information on how the pieces go together.
Most pieces may require support material, and works well printed at 0.2 or lesser layer height, 15-20% infill and with 3-5 shells.
Depending on your 3d printer and printing setting, you can expect to take around 40-50 hours for all the parts.
Have fun with this! =)
===
This model is not to be uploaded or sold in any form and is intended for personal use only.
Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http://www.FunbieStudios.com/)
Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog
| Date published | 20/03/2017 |
| Tecnología | FDM |
| Complejidad | Difícil |