Flexible Snake
Flexible Snake
3D
Published 2020-06-18T23:45:11+00:00
A flexible snake that is printed in one go. Files include a full-length seventeen-part snake and a shorter eight-part snake. I've also included versions without spikes and the individual pieces to allow for custom lengths. These pieces need to be aligned before printing as they can't be put together after. The tongue was made with a piece of red rubber band cut down the middle and folded in half. This model is the culmination of many hours of work. If you enjoy it and have the means, please consider supporting my work. Thank you.
Make sure you turn off all supports in your slicer. There are some decently steep angles, but my Ender 3 was able to handle it with no problems. The model pictured was printed at a 0.12mm layer height at an 85% scale. Avoid printing below around 50% scale.
| Date published | 18/06/2020 |
| Sin apoyo | YES |