Flower Pattern IPhone 5 Case
Flower Pattern IPhone 5 Case
3D
Published 2014-12-16T17:20:52+00:00
I designed this case for the IPhone 5s/5c using Solidworks.
I decided to try an intricate design for this case to add some fine details, the overall effect was good. However this design is worth downloading for the aesthetics rather than protection.
The edge of the case it strong so will protect your phone from knocks and scratches if dropped but the fine pattern on the back make it less able to protect the back of the phone case.
The case clips easily onto the phone clipping on snugly enough to stay on securely.
I designed it to be a fast and easy print - placed flat down onto the print bed (so the file will print as it is - without the need for support material or any extra measures).
I printed this one using an Ultimaker 2 but it will work just as well using other printers.
I used white PLA - at a layer height of 0.2mm and print speed 50mm/s with good results, as it is a fast print you could reduce the layer height further or choose slower print settings to produce a case of even higher quality!
Import the file into your printer software with the back facing down onto the print bed.
Turn off support material and you're ready to print.
The finish on the back of the case will be shinier if it is printed onto a smooth surface such as glass, printing onto other materials such as masking tape will result in more of a matte finish.
| Date published | 16/12/2014 |
| ¿Cuándo tiempo lleva? | 60 - 90 minutos |
| Cantidad de filamento | 20 grams |
| Dimensiones | 130mm x 63mm x 10mm |
| Complejidad | Muy fácil |
| Sin apoyo | YES |
