FNAF Special Delivery AR Badge
FNAF Special Delivery AR Badge
Published 2020-08-22T07:10:16+00:00
My son is a huge fan of FNAF and i'm in the process of printing him a headset stand for his desk. I wanted to make it special so I found a picture of this badge online, the image was black / white. Using Inkscape I traced it and saved it out as a .svg file. Using that I brought it into Fusion360 and made it into a printable model. Needless to say he's going to be super excited when I get this done for him. When I printed it I did a filament change to have the gold ontop of the black text. It didn't require any post work but once glued together I coated it in epoxy and have let it cure. It will end up being like a candy like button about 4" across. The three images, there is the grey screenshot from Fusion360, a shot of it in the sun (I had put 2coats of clear on it), and the shot of it with the epoxy. I should note FNAF is own by Scott Cawthon and he has full ownership of all the art associated with it. If desired I can remove this model from this site.
When I sliced it I reduced the design to 75%. I printed this with at 200'noz / 60 bed using PLA and did a filament change on layer 12 (setup through cura) from black to gold. I did set it to have 5% infill in the slicer.
Date published | 22/08/2020 |
¿Cuándo tiempo lleva? | 7 - minutos |
Sin apoyo | YES |