Fully Customizable Boat Rail Base
This object is currently under review. We cannot guarantee its printability just yet but this object is shareable and people with this link will be able to see and download it. If you would like to help us guarantee the printability of this object, please upload a picture of it printed.
Fully Customizable Boat Rail Base
Published 2021-04-05T17:03:07+00:00
Today we bring you a fully customizable boat rail fitting that can also be used for shower rails, clothes rails, etc.
This was created by request for one of our followers and is currently untested.
**Update**: This design can now also be used for rectangular tubes (as of version 1.2).
This design is completely free and shared under a permissive license. Your support is hugely appreciated.
Did you know?
Some of our designs cannot be found on MyMiniFactory. If you are looking for more, check out our premium projects:
https://codeandmake.com/premium
OpenSCAD Customizer Options
This design has the following Customizer options:
Material
- Material_Thickness - Thickness of the material
Tube
- Tube_Inside_Diameter - The inside diameter of the tube
- Round_Tube_Inside_Diameter - The inside diameter of the round tube
- Rectangular_Tube_Inside_Width - The inside width (Y axis) of the rectangular tube
- Rectangular_Tube_Inside_Height - The inside height (X axis) of the rectangular tube
- Min_Tube_Length - The length of the tube on the shortest side
- Tube_Angle - The angle to tilt the tube
- Tube_Bevel_Percentage - The amount to bevel the end of the tube (as a percentage)
- Grub_Screw_Hole_Diameter - Grub screw hole diameter. Not threaded. Will require manual tapping.
Base
- Base_Type - The type of base (round or rectangular)
- Screw_Hole_Diameter - The diameter of the screw hole
- Screw_Head_Diameter - The diameter of the screw head
- Screw_Head_Countersink_Angle - Screw countersink angle (82 and 90 are common)
- Screw_Padding - The minimum amount of padding around each screw
- Base_Bevel_Percentage - The amount to bevel the edge of the base (as a percentage)
Material
We recommend printing this in a durable filament, such as ABS, nylon or even metal!
Versions
1.4 (25 Apr 2021)
- Improved screw positions for round base with non-square rectangular tube
1.3 (25 Apr 2021)
- Fixed issue with bevelled corner for rectangular tube profile
1.2 (25 Apr 2021)
- Added rectangular tube profile (`Tube_Profile` option added and `Tube_Inside_Diameter` option replaced with `Round_Tube_Inside_Diameter`, `Rectangular_Tube_Inside_Width` and `Rectangular_Tube_Inside_Height` options)
- Improved preview performance
- Fixed bug when Rectangular `Base_Type` selected and `Base_Bevel_Percentage` set to 0
- Fixed round tube quality issue when `Tube_Angle` set to 90
1.1 (1 Apr 2021)
- Increased polygon count for smoother finish
- Added base type option (Base_Type) and a new base type (rectangular)
- Added screw padding option (Screw_Padding)
1.0 (31 Mar 2021) - Initial version
Printing
Recommended slicer settings:
- Resolution: 0.1mm - 0.2mm
- Infill: ~50% or higher if you need it to be extra durable.
- Supports: Should not be required
- Rafts: Not required, unless you experience adhesion issues.
License
The "Boat Rail Base" models (.stl) are licensed under the CC BY license by Code and Make.
The "Boat Rail Base" code (.scad) is licensed under The MIT License by Code and Make.
We are proud to offer content to you absolutely free.
We love to create free content for you. As you might imagine, it takes a lot of time. Supporters help us fund materials and equipment to create future projects and tutorials. To show your appreciation, please use the link below:
https://codeandmake.com/support
We thank you so much for your support!
Date published | 05/04/2021 |
Sin apoyo | YES |