Fun Burglary at the Mansion
Fun Burglary at the Mansion
3D
Published 2017-01-27T10:52:43+00:00
I hope you will enjoy this game recreation! It was a fun project and the results were stellar. If you have the time, print one for yourself.
I was not allowed to upload the shell script, which generates all the parts you see attached (via the scad file and running OpenSCAD). You can find the file on thingiverse.
Anyway, most parts print without supports. The exceptions are the corners. You also need to print the lock pieces upside down (but a support is already part of the model). Wall pieces should be printed with their interior side touching the plate (i.e. 90 degree rotation from standing upright).
You'll need 4 pawns and 9 treasures as well. Two dice can be used. (One die is for movement, the other is special: 1 triggers the motion alarm, and 6 triggers all cameras).
| Date published | 27/01/2017 |
| ¿Cuándo tiempo lleva? | - 6000 minutos |
| Cantidad de filamento | 600g |
| Dimensiones | 400x400x40 |
| Tecnología | FDM |
| Complejidad | Fácil |