Garden Scoop
Garden Scoop
3D
Published 2021-04-13T08:14:44+00:00
A 3D printable modern take on the Garden Scoop designed to scoop soil, sand, fertilizer and other items around your garden, flower beds, yard or at the beach.
The design consist of 3 parts that can be easily 3D printed, without any support, on a mid-size 3D Printer with a build area of at least 170 mm X 170 mm (~6.7” X 6.7”) or larger. The parts all have M16-02 threads incorporated into their design. They can be assembled by simply screwing the joiner into the handle and the scoop body.
They can be printed with a variety of materials, including PLA, PETG, ABS, ASA and many other types of printable materials.
PLA works well for this application as long as the parts will not be used, stored or kept at in a high temperature environment, exceeding ~55 C (~ 130 F).
PETG and ASA are other excellent choices.
The object should be durable, easy to maintain, and last for a long time.
September 23, 2021
A revised stronger joiner (version MK1.5) for this tool can be found here: URL: https://www.myminifactory.com/object/3d-print-stronger-gaden-tool-handle-joiner-mk1-5-186706
Recommended print settings with a .4 mm nozzle
- Layer Height: .2 mm
- 7 perimeters or shells (3.15 ~ 3.5 mm)
- 14 bottom layers (2.8 mm)
- 14 top layers (2.8 mm)
- Infill 15%~20%, depending on infill type
For a stronger M16-02 Joiner using PETG
Note: PETG works better on this mechanical part
- Layer Height: .2 mm
- 10 perimeters or shells (4.5 ~ 5mm)
- 16 bottom layers (3.2 mm)
- 16 top layers (3.2 mm)
- Infill 15%~20%, depending on infill type
Assembly Instructions
1- Insert the M16-02 mm joiner in the handle and thread until fully seated
2- Insert the handle assembly in the scoop body
3 - Tighten until the handle is seated against the scoop
4- DO NOT OVERTIGHTEN!
Optional: A small amount of glue applied to the handle seating area of the scoop will permanently join parts.
| Date published | 13/04/2021 |
| ¿Cuándo tiempo lleva? | 984 - 1200 minutos |
| Cantidad de filamento | 200 grams |