Gian Galeazzo Maria Sforza (?) relief at The Musée des Beaux-Arts, Lyon
Scan The World
2,085
visitas
65
descargas
1
colección
0 comentarios
Cargando comentarios...
Gian Galeazzo Maria Sforza (?) relief at The Musée des Beaux-Arts, Lyon
3D
Published 2016-11-03T11:04:46+00:00
1
0
Add to Collection
Licencia
Detalles de impresión
I choose to print it vertically (cutting the edge a little bit to make it stick to the bed) because in my opinion I achieved the best results. In fact, if you print it horizontal, with the back of the coin on the bed, you had to set the minimum layer height your printer can reach to show the details. Otherwise, if you settle to had a cutting edge, you will sure have all the details emerging, and still with no supports. I print it in vase mode, infill 0%, layer height 0.05mm, nozzle 0.4, with white PETG from REAL that gave it the glossy finish.
Información técnica
Date published | 03/11/2016 |
¿Cuándo tiempo lleva? | 30 - 120 minutos |
Cantidad de filamento | 5 |
Dimensiones | 70x70x6 mm |
Tecnología | FDM |
Más información
Titulo | Gian Galeazzo Maria Sforza (?) relief at The Musée des Beaux-Arts, Lyon |
Date | end of 15th Century |
Adhesión | D-48 |
Medio | Marble |
Crédito | Given by Edouard Aynard, 1880 |
Lugar | Musée des Beaux Arts de Lyon |
Archivos