Glow Tetrahedron
Glow Tetrahedron
Published 2019-12-01T02:25:16+00:00 • Remix de Foldable Tetrahedron - Print Flat
Really simple and cool model. Nice design by @DesignMakeTeach.
I added a small hole on the bottom where a switch can be placed. There are also some supports for the switch inside the object. Something like one of the switches here:
Adafruit Industries Breadboard-friendly SPDT Slide Switch
The inside measurement of the holder for the switch is 11.5mm X 5.85mm
There is a battery holder and cover that snaps in to keep wires tight so you don't need to solder anything to the battery. A CR2032 battery was used.
I very poorly soldered the wire ends to the switch and the LED, just good enough to work. Glued together afterwards.
Enjoy the lighted tetrahedron.
Printed with Inland transparent PETG.
The infill got kind of weird and gave it a nice frosty look.
Print in anything translucent/opaque or print with 1 or 2 outer walls and 5% infill.
Date published | 01/12/2019 |
¿Cuándo tiempo lleva? | - 120 minutos |
Dimensiones | 80mmx80mmx80mm |
Sin apoyo | YES |