Google Home Mini Buddy
9,530
visitas
803
descargas
6
colecciones
5 comentarios
Cargando comentarios... 
Google Home Mini Buddy
3D
Published 2019-02-11T12:38:30+00:00
135
5
Add to Collection
Descripción
This Google Home Mini Buddy is my first attempt at designing something myself. I designed it in Sketchup which was a real challenge. The face front and body can be printed without supports. For the face back don't be too cheap on the supports, I did and it ended up a bit flimsy. As mine is in front of a wall it doesn't really matter. You can screw the pieces together with some M4 bolts and nuts, you need 5 of them. The holes for the bolts are a tight fit so you can go without the nuts if you don't want to take it apart very often. If you use nuts you can widen the holes a bit with a small file or drill bit.
Información técnica
| Date published | 11/02/2019 |
| Dimensiones | 154mm x 166mm x 279mm |
Más información
Archivos
Thanks very much for this design. Printed nicely. Only my nuts didn't fit but nothing a file could fix. I have one happy daughter now!