Gravity Fed Hanging Bird feeder to Upcycle a 250ml Slim Can
Gravity Fed Hanging Bird feeder to Upcycle a 250ml Slim Can
3D
Published 2018-02-02T16:49:08+00:00
Gravity Fed Hanging Bird feeder with built in funnel to Upcycle a 250ml Slim Can. The base of the bird feeder has a built in funnel to fill the can without removing it. Just flip the feeder over and line the funnel up with the can opening and fill. After filling the can spin the base 180 degrees and flip the feeder back. The bird seed will flow out and into the side cups. The feeder is suppended by four strings that attach a ring to the top portion of the feeder. First the top section is installed over the can from the opposite end of the can. Next the base is installed by firmly pressing the can into the neck of the base. Lastly attach the strings and ring to hang the feeder.
Printed in PLA at 0.2mm layers with supports.
| Date published | 02/02/2018 |
| Tecnología | FDM |
| Complejidad | Fácil |