Gumby is an American clay animation franchise, centered on the titular green clay humanoid character created and modeled by Art Clokey. The character has been the subject of two television series, a feature-length film and other media.

The series follows Gumby on his adventures through different environments and times in history. Gumby's primary sidekick is Pokey, a talking pony.

No supports are required. If you have the proper filament colors, no painting is needed.

The Gumby assembled model is 120mm tall.
The Pokey assembled model is 105mm tall.

Enjoy!

**Pokey should be orange, but due to the sortage of filament I substitued a dark yellow**

...........................................................................................................

**Print Instructions:**
Supports: No
Resolution: .2mm
Infill: 10%

Notes:**

Refer to the notes below for a few helpful printing and assembly instructions.

...........................................................................................................

**Building the model:**
Colors

Black: (Paramount3D PLA - Black)
p_hair
p_tail
..

Blue: (Paramount3D PLA - Cadet Blue)
p_eye_blues (contains two pieces)
..

White: (Paramount3D PLA - White)
g_eye_white_right
g_eye_white_left
p_eye_white_right
p_eye_white_left
..

Yellow: (Paramount3D PLA - Simpson Yellow)
g_eyebrow_right
g_eyebrow_left
g_nose
g_mouth
..

Green: (Hatchbox PLA - True Green)
g_body
g_arm_right
g_arm_left
..

Red: (Hatchbox PLA - True Red)
p_eyes_red
..

Orange: (I did not have orange and substituted Paramount3D PLA - EggYolk Yellow)
p_body
p_body_with_supports (alternate piece with a built-in support for his chin)
p_leg_front_right
p_leg_back_right
p_leg_front_left
p_leg_back_left
..

...........................................................................................................

**Printing and assembly tips**

Printing tips
1-No supports are required

2-Use your judgement, however no rafts or brims are required.

3-Pokey should be printed in orange, but to to the current filament shortage I am still waiting for orange filamant to come in.

4-Pokeys legs all have the same connecting part to the body but they are slightly different. Be sure to keep track of which piece is which.

..
Assembly tips:

1-All parts that start with 'g_' are for Gumby and the parts with 'p_' are for Pokey.

2-The flat side from the print bed for the mouth goes into the body, the part is slightly tapered.

3-If you lose track of Pokey's legs, refer to the side view picture of him. Actually, I lost track myself and used my model picture as well for assembling the legs.

4-Refer to the assembly diagram in the pictures section as well as the uploaded pictures for putting the model together. The model is meant to be glued.

Do not hesitate to ask questions, feedback is essential to making better models.