ID Card Holder
5,506
visitas
466
descargas
4
colecciones
0 comentarios
Cargando comentarios...
ID Card Holder
3D
Published 2017-11-14T12:53:38+00:00
35
0
Add to Collection
Descripción
I designed and created this ID card holder, it can put two standard cards with dimension 86x54mm. The card are slot in thru the top opening, after which the clips will hook onto the slot hole. Thus preventing the cards from falling. Within the upper slot. I have also include a 1mm height stopper. Also strengthen this area.
This is a open card holder design, it is good for office card entry or transport transit card usage.
The overall thickness is just 5mm. The backing is just 1mm in thickness.
For 3D printing, it is advise to put a Raft and print it at the long side. Layer thickness to be 0.15mm with very slow speed.
Detalles de impresión
ok
Información técnica
Date published | 14/11/2017 |
¿Cuándo tiempo lleva? | 120 - 240 minutos |
Cantidad de filamento | 11 |
Dimensiones | 59 100 5 |
Tecnología | FDM |
Complejidad | Fácil |
Más información
Archivos