Infinite Vase//Planter__simple
Infinite Vase//Planter__simple
3D
Published 2015-10-02T11:34:48+00:00
Infinite Vase//Planter
(simple_no supports)
Sometimes a range of different vase sizes an shapes can be pleassing to the eye, but sometimes it is not. For all of you that would love a uniform stile vase (with the possibility of changing the layout) throughout the window stool I have created the Infinite Vase//Planter.
Minimum is 3 object to print - 2 end vases and 1 middle. After that, you can print additional middle parts an upgrade your flower community. You can print as many as you want or need to to fill the whole window stool, desk...
The parts slide one in the another (tounge-groove joint) and when they fall into place, they can be rotated +45 degrees / -45 degrees in relation to one another.
Every part has 3 holes - 1 for the planter (in the middle) and two for the vases. The planter hole has a lower walls towards the vase part so any water that can be spilled over will be spilled into the vase chamber. Vase holes have a pyramid shaped flower holder and are connected together beneath the planter hole.
Print without support. Print at 0.2 mm layer height, with 10% infill.
| Date published | 02/10/2015 |
| ¿Cuándo tiempo lleva? | 2860 - 2870 minutos |
| Cantidad de filamento | 720 g |
| Dimensiones | Multiple parts |
| Tecnología | FDM |
| Complejidad | Medio |
| Sin apoyo | YES |