Joel 3DPN Spool holder ***THE ONE***
Joel 3DPN Spool holder ***THE ONE***
Published 2018-08-14T15:50:35+00:00
I designed this spool holder to fit onto Joels fancy shelf, it will fit on the shelf between the flanges of the spool,it is also easy to move around between printers i have designed it at an angle so the spool will sit higher than the shelf and stick out so it is above the printer, some of joels printers are quite high so if it is fitted to the bottom shelf it will not be obstructed by the printer, the spool holder has a good roling resistance, the spool rolls easily, its 100% 3D printed so no need to go looking for bearings and scratching around for screws and bolts.
i re designed one for my self to fit onto my Prusa MK2S and it works like a charm.
i hope you like it.
HIGHFIVE!!!
I printed this on my Prusa MK2S
Filament:- Black Pla from HEXAFLOW
layer hight:- 0.2mm
infill:- 5% (i would recomend at least 25/30%)
print time +- 4:46 (with 5% infill 0.2mm layer hight and linear advanced)
Date published | 14/08/2018 |
¿Cuándo tiempo lleva? | 306 - 307 minutos |
Cantidad de filamento | 54.13g |
Dimensiones | 190.44 X 143.46 X 120.00 |
Tecnología | FDM |
Complejidad | Fácil |
Sin apoyo | YES |