Leia's lightsaber Episode IX
Leia's lightsaber Episode IX
3D
Published 2020-01-02T15:57:33+00:00
This is my version of the lightsaber made by Leia in Episode IX of Star Wars wielded by Leia, Rey and Ben.
It is made to fit together as is and can be glued to stay in place. It can also be used around a tube with a diameter of 28mm for the wide part, for enhanced strength and more weight. The parts may need sanding in order to fit together, depending due to the tolerance of parts.
There is a total of four "ringparts" at the top of the emitter where the top and the bottom each are unique, the two middle ones are the same, these are marked "Ring2+3x2" and requires to be printed twice.
The bottom cap features a hole for a D-ring of ca 1.5 mm diameter, but since the printing might not support the full weight of the hilt please use this with caution.
I have only printed some parts of it as of right now, but i will provide a picture of the print once finished.
The full saber has also been uploaded, so that you can view the dimensios of the saber to adjust before printing or if you just want to use it for reference.
| Date published | 02/01/2020 |