Lockpick Puzzle 03
Lockpick Puzzle 03
3D
Published 2018-09-19T01:12:32+00:00
Twist and turn the handle on this lock to solve the maze hidden inside. My Lockpick puzzles are the result of my goal of creating a print-in-place puzzle that comes off the print bed ready to solve!
This is puzzle number 3 of 10. I tried to make it so the puzzles become increasingly difficult through the series, although they're all still on the easier side. If there's enough demand I can continue and make things more difficult :)
For ideal results, print at 0.15mm layer height. Other layer heights may make it difficult to snap the handle and lock apart. 2-3 shells and 5-10% infill should be fine. No supports. You can increase shell count if you're worried about the inner rod breaking, but I had no problems.
Model pictured in MatterHackers Yellow PRO PLA
| Date published | 19/09/2018 |
| Sin apoyo | YES |
Attention: The key-separated.stl in the zip of lock 03 ist way to big ;)After printing Lock 01 an 02 fused together in my prints and i cutet through key of lock 02 to get it separated, I wanted to print 2 spare keys out of the lock 03 zip.Thanks to Devin for the great Design and fun I had so far. Looking forward to print all 10 Locks :D