maakmake] Shooting target series (replaceable)
![maakmake] Shooting target series (replaceable) image](https://cdn.myminifactory.com/assets/object-assets/595cc2db40105/images/70X70-kakaotalk-20170203-111913053.jpg)
![maakmake] Shooting target series (replaceable) image](https://cdn.myminifactory.com/assets/object-assets/595cc2db40105/images/70X70-kakaotalk-20170203-111911219.jpg)
![maakmake] Shooting target series (replaceable) image](https://cdn.myminifactory.com/assets/object-assets/595cc2db40105/images/70X70-kakaotalk-20170203-111911900.jpg)
![maakmake] Shooting target series (replaceable) image](https://cdn.myminifactory.com/assets/object-assets/595cc2db40105/images/70X70-kakaotalk-20170203-111912496.jpg)
maakmake] Shooting target series (replaceable)
3D
Published 2017-07-05T17:21:12+00:00
it have three great advantages.
-
This object's height is set 10cm. so you can adjust target size very easily using scale button ( ex) if you want to make 6cm height target, set up scale 0.6 )
-
This target is made separately. so you don't have to print whole objects if target broken. you can replace another target easily through printing target without stand. it save your time and filaments.
- you can replace your own target using this stand like a picture! paper, CDs, hardboard, and so on.
You can watch the video in yotube!
https://youtu.be/_HTTYwynwSQ
Printer : sindohrico,cubcon
Rafts : Yes
Supports : Doesn't Matter
Resolution : normal
Infill : doesn't matter
Notes : I don't recommend change scale rate setting below 0.4. because clamp part of target stand maybe stick each other so you maybe have to cut this part.
How I designed this
| Date published | 05/07/2017 |
| Tecnología | FDM |
| Complejidad | Fácil |