Mikrotik wAP 60G Pole mount
2,745
visitas
114
descargas
0 comentarios
Cargando comentarios... 
Mikrotik wAP 60G Pole mount
3D
Published 2019-07-05T11:13:41+00:00
0
0
Add to Collection
Descripción
This is a pole mount for the wAP 60G devices from Mikrotik. The expected pole diameter is 25mm. To assemble this mount you need
- One M8x55 screw with hex head
- One square M8 nut
- Two M4x15 screws
- Two M4 washers
- Two M4 nuts (doesn't if square or hex)
- 2 5mm wide cable straps to secure the mount on the pole
The device is mounted with M4 screws and nuts. Simply screw the metal backplate on the mount with the M4 screws and nuts. The nuts go on the "inside" of the metal backplate. I recommend using washers on the back of the mount.
Two assemble the two parts of the mount simply put the M8 nut into the designated hole, hold the two parts together and tighten the M8 screw.
Licencia
Información técnica
| Date published | 05/07/2019 |
| ¿Cuándo tiempo lleva? | 4 - 45 minutos |
Más información
Archivos