mini-ITX case
5,086
visitas
197
descargas
1
colección
0 comentarios
Cargando comentarios... 
mini-ITX case
3D
Published 2020-10-05T20:05:23+00:00
11
0
Add to Collection
Descripción
This is an open mini ITX case. You can use it as is or as part of a custom case.
It was designed with M3 threaded inserts in mind for extra stability.
The larger holes are for inserts, the smaller ones for M3x16 countersunk screws.
Depending on your settings you might have to drill out the smaller holes a bit.
The holes in the back are for standard PSU screws.
The holes in the PCI-E plate are spaced for an extension cable I want to use. I don't know if other cables have the same spacing.
Licencia
Detalles de impresión
PCI plate and pillar should be printed laying on their side.
Make sure to have enough perimeters for the inserts.
Información técnica
| Date published | 05/10/2020 |
| Sin apoyo | YES |
Más información
Archivos