Mini Milling Machine Remix
The original mini milling machine was really a nice project. There was at one point another version, but I get a 404 at the time of writing this.
So, I tried the original out, but had similar questions as others like how does the c clip attach to the screw. I decided to remix and make some changes.
I altered the screw so there is a dedicated spot for the c clip at the knob end of the screw. I also did the same for the screw that moves the slide vertically and this required a separate part. I altered the block screw part and made it a through hole object, so you insert it from inside the base and then the screw goes into it and the block screw holds the screw in place along with the c clip.
If you spend time fitting the parts where they have surfaces that slide against each other you shouldn't need to use oil for a lubricant. The screws threads also need some attention to work smoothly. Metal files and sandpaper are essential to a well fitting working machine.
I printed with PETG. Sorry for the ugly filament colors. I use the M3D Quad which mixes CMYK color filament and I wasn't concerned about the colors when I was printing this and in the end it is easy to see the different parts.
Date published | 18/11/2020 |