MK11 Sub Zero Belt Accessory - Sareena's Momento
1,465
visitas
69
descargas
0 comentarios
Cargando comentarios... 
MK11 Sub Zero Belt Accessory - Sareena's Momento
3D
Published 2020-11-12T15:32:21+00:00
7
0
Add to Collection
Descripción
Here is my take on MK11 Sub Zero's belt accessory - Sareena's Momento. This was 3d modeled in Autoddesk Fusion 360. This is my interpretation on it - I did not model the cloth wrap because it would be easier to 3d print without it and easier to just wrap it with real cloth after it's been printed.
The dimensions for one half, laid flat on the print bed are:
- 7.2in x 1.37in x 0.21in
- 182.88mm x 34.92mm x 5.36mm
I have uploaded both the whole and half model.
Note: this is for a costume prop only. This is not meant to be used as a weapon and can be dangerous is used improperly. Please use proper judgement - I know you will.
Detalles de impresión
Printed on my Anet A8
Two halves on one build plate:
20% Infill
3 shells
0.2 layer height
Información técnica
| Date published | 12/11/2020 |
| Cantidad de filamento | (For both halves) 13g |
| Dimensiones | (For both halves) 182.9mm x 75.7mm x 5.4mm |
Más información
Archivos