Mobious Kaleidocycle
Mobious Kaleidocycle
3D
Published 2020-12-13T17:40:15+00:00
This is the Mobious Kaleidocycle model from @emancarrillo:
https://www.thingiverse.com/thing:4037073
The design and the concept was originally from the company Degrees of Freedom, which can be found on Instagram @degreesoffreedomco.
To create this print properly you will need to print 3 of each file (3 side pieces, 3 base pieces). I found it very helpful to print them in different colors when I was assembling them.
Also, when slicing, scale the models up slightly to 101% so there's a better tolerance for the magnets and button head screws. You will need 6, M3x10mm button head screws and 6, 5mm x 2mm magnets. You might need to use some super glue to secure the magnets, but nothing too excessive. An small allen wrench is required for the button head screws.
I printed this at 0.2mm resolution, 20% infill, with Overture PLA Blue and eSun Filament PLA+ Black.
| Date published | 13/12/2020 |
| ¿Cuándo tiempo lleva? | 228 - minutos |
| Sin apoyo | YES |