Modular wall hanger
Modular wall hanger
3D
Published 2017-09-25T09:35:04+00:00
Looking for a new wall hanger to hang your clothes??
I designed this practical modular hanger which can easily withstand the weight of coats, bags and even my motorbike helmet!
Having a modular design means that you can print as many of these as you want depending on your needs. You can print them all in one color, or mix according to your taste.
For joining every two modules, you will have to print two of the included pins. I recommend using glues for polymers or CA glue.
To attach the hanger to the wall, you will need (straight) screw hooks, with a hook smaller than 18 mm. You can either slide the hanger from the side, or use the holes on the back to insert the screw hooks. I have used two hooks for five modules and seem to be enough.
Enjoy and like if you do!
Recommended settings for Hanger:
- Nozzle diameter: 0,4 - 0,6 mm
- Layer height: 0,2 - 0,25 mm
- 2 Shells (0,8 - 1,2 mm)
- Fill percentage: 20 - 25 %
- Printing speed: 30 - 40 mm/s
- Brim is recommended: 5 -10 lines
- No support needed (But be sure to have enough fan flow between 35 and 65 mm in height)
Recommended settings for Pin:
- Nozzle diameter: 0,4 mm
- Layer height: 0,2 mm
- 2 Shells (0,8 mm)
- Fill percentage: 25 %
- Printing speed: 30 mm/s
| Date published | 25/09/2017 |
| ¿Cuándo tiempo lleva? | 170 - 220 minutos |
| Cantidad de filamento | 30 grams |
| Dimensiones | 49x36x100 mm |
| Tecnología | FDM |
| Complejidad | Fácil |
| Sin apoyo | YES |